ADTRAN Express XRT - Manual (Page 82)

Appendix A. AT Commands and S-Registers
68 Express XRT User Guide 61202.153L3-1
S73 DTE PARITY Selects the number of asynchronous parity
bits.
0=None
1=Odd
2=Even
S74 DTE STOP Selects the number of asynchronous parity
bits.
0=None
1=Odd
2=Even
S75 DTE FLOW Selects asynchronous flow control.
0=None
1=XON/OFF from DTE controls DCE
2=XON/OFF from DCE controls DTE
3=Hardware
12=Software
SS77 REMOTE
NUMERIC PASS-
WORD
Numeric password string for remote config-
uration.
The following are the string locations for stored numbers 0 - 9:
SS80 SN0 LOC Stored number 0 string
SS81 SN1 LOC Stored number 1 string. Used for second
number dialed in a multilink connection.
SS82 SN2 LOC Stored number 2 string
SS83 SN3 LOC Stored number 3 string
SS84 SN4 LOC Stored number 4 string
SS85 SN5 LOC Stored number 5 string
SS86 SN6 LOC Stored number 6 string
SS87 SN7 LOC Stored number 7 string
SS88 SN8 LOC Stored number 8 string
SS89 SN9 LOC Stored number 9 string
S90 CONFERENCE
ID
NI-1 feature identification number for con-
ferencing. See the ISDN service provider for
this ID.
S91 TRANSFER ID NI-1 feature identification number for trans-
ferring. See the ISDN service provider for
this ID.
S92 MESSAGE
WAITING ID NI-1 feature identification number for mes-
sage waiting indicator. See the ISDN service
provider for this ID.