ADTRAN Express XRT - Manual (Page 65)

Chapter 5. Upgrading Software
61202.153L3-1 Express XRT User Guide 51
HyperACCESS
For Windows 95 and Windows NT 4.0:
From the Start button, choose Programs, then HyperACCESS for
Windows.
For Windows 3.1 and Windows NT 3.51:
1. Open the Program Manager. Double-click the HyperACCESS
for Windows program group and then the HyperACCESS for
Windows icon.
2. Press the New button in the Phonebook window.
3. Type in a name for the session in the System Name box.
4. Choose an icon for the session.
5. Click the OK button.
6. On the session Communications screen, do not enter a Phone
number . For the Port name, select the COM port to which the
Express XRT is connected.
7. Enter the following for the remainder of the settings:
Settings : auto-detect
Terminal emulator : VT 100
Baud rate : 57600
Priority : Normal
Port type : Standard Com Port
Modem : Direct Connect (Cabled)
Figure 5-3
HyperACCESS Communications Dialog Box
8. Click OK once all the settings are entered.
9. Click on the Establish a Connection button on the tool bar (the