HP Matrix Operating Environment Software - Manual (Page 105)

When using active/active configuration, the Redundant flag must be left deselected, and you
must explicitly wire two separate Virtual Connect networks to represent the same active/active
network in the data center.
6. In the Software tab, select the OS and any additional software.
7. (Optional) On the Load Balance tab, request a load balancer containing the specified attributes
to distribute network traffic across servers in a virtual or physical server group.
For more information about configuring load balancers, see “Configuring a load balancer”
(page 49) .
8. Configure the Physical Storage component. The Storage Type is FC-SAN.
Check Select a storage template or Specify desired attributes. See “Physical storage
provisioning” (page 146) for a description of these options.
Select the Disk is bootable checkbox. Leave the RAID Level set to Any.
Creating infrastructure orchestration templates 105