LG LGVS985 - Manual (Page 18)

16 The Basics
Battery saver mode, when the battery charge becomes low, a
notification prompts you to turn it on.
From the Battery saver screen, checkmark the saving items you want,
including Auto-sync, Wi-Fi, Bluetooth, Vibrate on tap, Brightness, Screen
timeout, and Notification light.
After you modify the Battery saver settings to your preferences, tap the
switch (at the upper-right corner of the screen) to toggle it On (blue)
or Off (gray).
Turning the Phone On and Off
Turning the phone on
Press and hold the Power/Lock Key on the back of the phone for a
couple of seconds until the screen turns on.
Turning the phone off
1. Press and hold the Power/Lock Key on the back of the phone until
the Phone options menu appears.
2. Tap Power off in the Phone options menu.
3. Tap OK to confirm that you want to turn off the phone.
Turning the screen on using the Knock Code feature
If your Lock screen unlock sequence is set to a Knock Code, tap your
Knock Code on the darkened screen to automatically turn the screen on
and unlock it at the same time.
TIP When the screen is in time-out and a Knock Code is set, pressing the Power/Lock Key
(on the back of the phone) displays the Lock screen (e.g., to check the time). You can
tap your Knock Code to unlock the screen or turn the screen back off by pressing the
Power/Lock Key again (or double-tap the Status Bar).
NOTES • Entering the incorrect Knock Code 10 times will perform a factory reset on your device
and you will lose all of your information. You will be warned on the 9th failed attempt.
•
Use a fingertip instead of a fingernail to tap the screen to turn the screen on.
• If Knock Code isn't your unlock sequence, the Knock Code feature isn't activated, and
you can use the KnockON feature by double-tapping the screen.