APC Network Management Card none - Manual (Page 8)

Network Management Card User’s Guide 1
Network Management Card
Introduction
Product Description
Functionality American Power Conversion’s Network Management Card is a web-
based UPS Management product that uses multiple, open standards
such as Telnet, HTTP, and SNMP to provide full management of UPS
systems. Through the Network Management Card, you can monitor and
configure your APC UPS systems to shut down and reboot your
computer systems.
The Management Card can be installed into the following APC devices:
• Any Smart-UPS
®
or Matrix-UPS
®
model that has an internal
expansion slot, as well as any Symmetra
®
, Symmetra 3 Phase,
or Silcon™ DP300E series UPS models
Note: A Silcon™ DP300E, which does not have an expansion
slot, requires using an Expansion Triple Chassis.
• Expansion Chassis (AP9600)
• Expansion Triple Chassis (AP9604, AP9604R, or AP9604SR)
Initial set-up You must define three TCP/IP settings for the Management Card before
it can operate on the network.
• IP address of the Management Card
• Subnet mask
• IP address of the default gateway
For instructions about how to configure the TCP/IP settings, see the
Network Management Card Installation and Quick Start Manual,
provided in printed form, and in
PDF on the APC Network Management
Card utility CD ( .\doc\Insguide.pdf).
&RQWLQXHG RQ QH[W SDJH