Control console, Main screen frqwlqxhg – APC Network Management Card none User Manual
Page 16
Network Management Card User’s Guide
9
Status and
identification
information,
continued
•
Two fields identify when you logged in, by
Date
and
Time
.
Date : 07/22/2001
Time : 06:44:47
Note:
For information about how to change the
Date
and
Time
values, see
.
•
A
User
field identifies whether you logged in as an
Administrator
or
Device Manager
.
User : Administrator
•
A
Stat
field reports the Management Card status.
Stat : P+ N+ A+
Where,
P+
indicates that the APC operating system (AOS) is Ok
N+
indicates that the network is Ok
A+
indicates that the application is Ok
A-
indicates that the application has a bad checksum
A?
indicates that the application is initializing
A!
indicates that the application is not compatible with the AOS
Note:
If you can access the Control Console, the AOS and
network will report that the status is OK (
P+
and
N+
).
•
An
Environment
field reports the status of the Environmental
Monitor, when this device is used.
Environment: Thresholds Ok, Contact Alarms Ok
Note:
For more information about the Environmental Monitor
status, see
•
A
UPS model and name
field reports the status of the UPS.
Smart-UPS 1400 RM named User Ed: On Line
Note:
For more information about the UPS status, see