beautypg.com

Internal management features, Overview, Login control – APC Network Management Card none User Manual

Page 10: Types of user accounts, 2yhuylhz, Rjlq frqwuro, 7\shv ri xvhu dffrxqwv, Introduction

background image

Network Management Card User’s Guide

3

Introduction

Internal Management Features

Overview

The Management Card has two internal interfaces which provide menus
with options that allow you to manage the UPS, an Environmental
Monitor, and the Management Card: the Control Console and the Web
Interface. The Management Card’s SNMP interface also allows you to
use an SNMP browser with the PowerNet MIB to manage the UPS and
an Environmental Monitor.

For more information about the Management Card’s internal user
interfaces, see

Control Console on page 6

and

Web Interface on

page 12

; for more information about how to use the PowerNet MIB with

an SNMP browser, see the PowerNet® SNMP Management Information
Base (MIB) Reference Guide
which is provided on the APC Network
Management Card utility CD (.\doc\Mibguide.pdf)

Login control

Only one user at a time can log into the Management Card to use its
internal user interface features. The priority for access is as follows:

Local access to the Control Console from a computer with a
direct serial connection to the Management Card always has
the highest priority.

Telnet access to the Control Console from a remote computer
has the next highest priority.

Web access has the lowest priority.

Note:

For information about how SNMP access to the
Management Card is controlled, see

SNMP on page 21

.

Types of user
accounts

The Management Card has two levels of access (Administrator and
Device Manager), both of which are protected by

Password

and

User

Name

requirements.

An Administrator can use all of the management menus
available in the Control Console and the Web Interface. The
Administrator’s default

Password

and

User Name

are both

apc

.

A Device Manager can only access the

Log

option in the

Events

menu and use the

UPS

and

Environment

menus. The

Device Manager’s default

Password

is

device

, and the default

User Name

is

apc

.

For information about how to set Administrator and Device Manager

Password

and

User Name

settings, see

User Manager on page 23

.