APC Network Management Card none - Manual (Page 61)

Network Management Card User’s Guide 54
Network Management Card
Data Menu
Menu Options
Log option Use this option to access a log that stores information about the UPS,
the power input to that UPS, and when an Environmental Monitor is
used at the UPS, information about the ambient temperature and
relative humidity measured by that monitor’s probes.
The information in the data log is sampled and stored based on the log
interval defined by the
Data menu’s Configuration option. Each entry is
listed by the date and time the data was recorded, and provides the data
in a column format.
The data recorded depends on the UPS model. For example, a 3-phase
Symmetra records the bypass voltage for each phase under columns
labeled
Vbp1 to Vbp3 ; a Smart-UPS 700 does not have multiple
phases, nor does it use bypass voltages.
For descriptions of the recorded data that is specific to your UPS, see
the online help in your Network Management Card’s Web Interface.
For information about how you can retrieve the data log as a text file,
see
How to use FTP to retrieve log files on page 46 .
Configuration
option Use this option to access the “Data Log Configuration” page. This page
reports how much data can be stored in the data log based on the
Log
Interval setting which defines how often data will be sampled and
recorded in the data log. If you change the Log Interval , the report
updates to reflect the effect of the new setting.
The minimum interval is 60 seconds; the maximum interval is 65,535
seconds.