Date & time, Dwh 7lph, System menu – APC Network Management Card none User Manual

Page 31: Option settings frqwlqxhg

Network Management Card User’s Guide

Date & Time

Use this option to set the time and date used by the Management Card.
The option displays the current settings, and allows you to change those
settings manually, or through a Network Time Protocol (NTP) Server.

Manual.

Use this option (

Set Manually

in the Web Interface) to set the

Date

and

Time

settings for the Management Card.

Note:

Apply Local Computer Time to Network Management Card

option, which is available in the Web Interface only, sets these
values to match the date and time settings of the computer you
are using to access the Web Interface.

Network Time Protocol (NTP) .

Use this option (

Synchronize with

Network Time Protocol (NTP) Server

in the Web Interface) to have an

NTP Server automatically update the

Date

and

Time

settings for the

Management Card.

Note:

The Control Console has a

NTP Client

option that enables or

disables (the default) the NTP Server updates, while in the Web
Interface, selecting the

Set Manually

option disables the

updates.

&RQWLQXHG RQ QH[W SDJH

6HWWLQJ

'HILQLWLRQ

Primary NTP Server

Identifies the IP address of the primary NTP server.

Secondary NTP Server

Identifies the IP address of the secondary NTP server,
when a secondary server is available.

GMT Offset (TIme Zone)

Defines the offset to be used from Greenwich Mean
TIme (GMT) based on the Management Card’s time
zone.

Update Interval

Defines how often, in weeks, the Management Card
will access the NTP Server for an update (

week

minimum,

weeks maximum).