APC Network Management Card none - Manual (Page 65)

Network Management Card User’s Guide 58
Troubleshooting
Management Card
FRQWLQXHG
SNMP issues The following table describes known SNMP problems.
3UREOHP 6ROXWLRQ
Unable to perform a GET
• Verify the read (GET) community name.
• Use the Control Console or Web Interface to ensure
that the NMS has access. See SNMP on page 21 .
Unable to perform a SET
• Verify the read/write (SET) community name.
• Use the Control Console or Web Interface to ensure
that the NMS has write (SET) access. See SNMP on
page 21 .
Unable to receive traps at
the NMS
Query the mconfigTrapReceiverTable PowerNet MIB
OID to see if the NMS IP address is listed correctly, and
the community name defined for the NMS matches the
community name in the table. If not, use SETs to the
mconfigTrapReceiverTable OID s, or use the Control
Console or Web Interface to correct the trap receiver
definition problem. See
SNMP on page 21 .
Traps received at an NMS
are not identified
See your NMS documentation to verify that the traps
are properly integrated in the alarm/trap database.