Email recipients, Pdlo 5hflslhqwv, Events menu – APC Network Management Card none User Manual
Page 58: Email feature frqwlqxhg

Network Management Card User’s Guide
51
Email Recipients
The
Recipients
option in the Web Interface’s
Events
menu, or the
option in the Control Console’s
Network
Menu, accesses the settings
you use to identify each of up to four Email recipients.
Note:
The Web Interface has an
Email Test
option, which is located
directly below the
Email Recipients
settings, you can use to
send an Email test message to any defined (and enable) Email
recipient.
&RQWLQXHG RQ QH[W SDJH
6HWWLQJ
'HVFULSWLRQ
To Address
Defines the user and domain names of the recipient. To use
Email for paging, use the Email address for that recipient’s
pager gateway account (for example,
).
The pager gateway will generate the page.
Note:
Email can only send text messages. Therefore, the
recipient’s pager must be able to use text-based
messaging.
Use SMTP Server
Selects whether Email will be routed through the Management
Card’s SMTP server (
Local SMTP Server
option) or sent
directly to the recipient’s SMTP server (
Recipient’s SMTP
Server
option). When the recipient uses the same SMTP server
as the Management Card, this setting has no affect.
Note:
The recommended selection is the
Local SMTP Server
option. For information about why this is recommended,
and for issues to keep in mind when selecting the
Use
SMTP Server
setting, see
Configuration Issues on page 52
.
Generation
Enables (by default) or disables the sending of Email to the
defined recipient.
Format
Selects format used for Email messages:
•
Short
: The message identifies only the event that occurred.
For example:
UPS: Communications Established
•
Long
: The message includes information about the
Management Card and UPS, and event. The following is an
example of what the Long format could look like for the UPS:
Communications Established event:
Name
: Writer1
Location : JKing
Contact
: User Ed Department
http://xxx.xxx.xx.xxx
Serial # : Wa12
UPS Ser #: XS9849007541
Date: 08/12/2001
Time: 16:09:48
Code: 0x0002
Severe - UPS: Communications Established