APC Network Management Card none - Manual (Page 34)

Network Management Card User’s Guide 27
Device Manager Menus
UPS Status
Overview The Status options provide access to the information described in the
following sections:
• Detailed UPS Status on this page
• Utility Voltage Status on page 28
• Output Power Status on page 29
• Fault Tolerance (Symmetra or Symmetra 3 Phase UPS) on
page 30
• Battery on page 30
Note: No description is provided for the self-explanatory About
UPS status fields.
For a Silcon DP300E series UPS, the “Status of UPS” page in the Web
Interface includes the
View the refreshing status page hyperlink
described in Configure the Multiple/Parallel UPS IP Address and
Monitor Name (Silcon DP300E series UPS only) on page 37 .
Detailed UPS
Status The Web Interface reports UPS status information on the “Status for
UPS” page that is accessed by the
Status option in the UPS menu:
• The UPS Status fields includes information about the following:
– The current status of the UPS.
Note: The current UPS status also appears on the
“Summary”, “Control”, and “Diagnostics” pages.
– The reason for the last transfer to battery power at the UPS.
– The internal temperature of the UPS .
– The runtime that is currently available to the UPS.
• The values described in Utility Voltage Status on page 28 ,
Output Power Status on page 29 , and Battery on page 30 .
• The Fault tolerance parameters described in Fault Tolerance
(Symmetra or Symmetra 3 Phase UPS) on page 30 .
The Control Console, which reports some UPS status information above
the
UPS menu, has a Detailed Status (Smart-UPS or Matrix-UPS) or
Detailed UPS Information (Symmetra, Symmetra 3 Phase, or Silcon
DP300E series UPS) option you use to access all UPS status
information. In addition, for all Symmetra UPS models, a
Faults &
Alarms option in the Control Console’s UPS menu accesses
descriptions of any faults or alarms reported as part of the UPS status.
Note: A Silcon DP300E series UPS can report a non-specific fault for
about 50 different conditions. Access the UPS Keyboard for
details when a non-specific fault is reported.
For information about how to access a list of the UPS events that can be
reported as part of the UPS status, see “Event List” page on page 53 .