Avaya 3600 - Manual (Page 40)

Avaya, Inc. Configuration and Administration—AVAYA 3616/3620/3626 WT
Avaya CCMS IP, Avaya Call Server, with Avaya 4612 IP Telephone Emulation
21-300352, Issue 2, July 2005 Page 40
9. Testing a Wireless Telephone
Verify proper registration and operation of each Wireless Telephone by performing the following tests
on each Wireless Telephone in an active wireless area.
1. Power on the Wireless Telephone by pressing
Power On
. You will see a series of messages
displayed as the Wireless Telephone acquires the system. The Wireless Telephone should
display the user extension. Any error messages should clear.
2. Press the
Start Call
key. The extension number should be replaced by information from the
Avaya Call Server and you should hear dial tone. Place a call and listen to the audio quality.
End the call by pressing the
End Call
key.
3. Place a call to the Wireless Telephone and verify ring, answer, clear transmit, and clear
receive audio.
4. Press the
Start Call
key.
5. Use the
FCN
key to verify all programmed features on the Wireless Telephone, and press
End Call
when finished.
6. Use the
LINE
key to verify the programmed line appearances, and press
End Call
when
finished.
7. Press the
End Call
key. Any line indicators should turn off and the extension number
display will return.