Avaya 3600 - Manual (Page 15)

Avaya, Inc. Configuration and Administration—AVAYA 3616/3620/3626 WT
Avaya CCMS IP, Avaya Call Server, with Avaya 4612 IP Telephone Emulation
21-300352, Issue 2, July 2005 Page 15
3.4 Wireless Telephone Modes
Standby
(on-hook)
In the standby mode the Wireless Telephone is waiting for an incoming
call or for the user to place an outgoing call. The extension number is
shown on the display and there is no dial tone. In this mode, the Wireless
Telephone is conserving battery power and wireless LAN bandwidth.
When an incoming call occurs the handset will ring until the call is
answered by pressing the
Start Call
key or the
End Call
key is pressed to
silence the ringing.
Active
(off-hook)
To place a call, press the
Start Call
key. This transitions the Wireless
Telephone to active off-hook mode. There is a dial tone, the Wireless
Telephone is in communication with the PBX, and the display shows
information as it is received from the PBX. The user may place a call or
press the
FCN
or
LINE
key to access operations.
The Wireless Telephone is also in the active mode when a call is
received.
When an incoming call occurs during an active call, the handset will play
the second line ringing sound until the call is answered, the caller hangs
up, or the caller transfers to voice mail. If
End Call
is pressed, the first
call is terminated and the handset reverts to a full ring.
The active modes utilize the most bandwidth and battery power. To
conserve these resources, return the Wireless Telephone to the standby
mode when a call is completed by pressing the
End Call
key.