Avaya 3600 User Manual
Page 30
Avaya, Inc.
Configuration and Administration—AVAYA 3616/3620/3626 WT
Avaya CCMS IP, Avaya Call Server, with Avaya 4612 IP Telephone Emulation
21-300352, Issue 2, July 2005
Page 30
Firmware
Version
: displays the software version running the Wireless Telephone. The MAC
address is the hardware identification number and is set at the factory. Three code numbers
correspond to the three files that each version uses.
(
MAC address
)
(
downloader code
)
(
functional code
)
(
phintl
file
)
OK Up
Downloader: pd11gl3.bin
Functional: pd11xxx3.bin
Phintl: phintl24.bin or pi11xxx.bin
Call Server IP
: This option displays the IP address of the Avaya Call Server with which the Wireless
Telephone is registered. The IP address is not set here; it is merely displayed and may not be
changed.
Call Server Port
: This option displays the UDP port number used when registering with the Avaya Call
Server. The port address is not set here; it is merely displayed and may not be changed
Push-to-Talk
: The AVAYA 3626 Wireless Telephone incorporates push-to-talk functionality. PTT may
be allowed or disallowed in the Admin menu. If allowed, the user may enable or disable
locally, and may set the channel, tone volume and audio volume. The menu for push-to-talk
does not appear if PTT is disallowed on the Admin menu or if no channel is enabled on the
Admin menu.
Channel
Enable/Disable
Audio Volume
Tone V olume
OK Up
Channel
: The user may enable any PTT channel that has been allowed in the Admin menu by
entering the corresponding number from the keypad. If PTT has been enabled in this handset,
the default channel is the lowest allowed channel as set in the Admin menu.
Current Channel: X
1 2 3 4 5 6 7 8
New Channel = ?
Up
Enable/Disable:
The user may enable or disable PTT on this handset. PTT is disabled by
default.
PTT Enabled
PTT Disabled
OK Up
Audio Volume, Tone Volume
: The user may select a volume level by pressing the
Up
and
Down
side buttons and then pressing the
OK
softkey. The graduated volume bar indicates the levels.
The Audio Volume setting may be overridden by adjusting volume while the handset is in a
Push-to-talk call.