Canon FAXPHONE L100 - Manual (Page 86)

86
(3)
(3)
(2)
OFF
(1)
(1)
(2)
(2)
•
Do not use this product near any medical electric equipments.
Radiowave emitted from this product may infl uence those
medical electric equipments. This may result in accidents
caused by malfunction.
CAUTION
•
Do not install the machine in unstable locations, such as on
unsteady platforms or inclined fl oors, or in locations subject to
excessive vibrations, as this may cause the machine to fall or tip
over, resulting in personal injury.
•
The ventilation slots are provided for proper ventilation of
working parts inside the machine. Never place the machine on
a soft surface, such as a bed, sofa, or rug. Blocking the slots can
cause the machine to overheat, resulting in a fi re.
•
Do not install the machine in the following locations, as this may
result in a fi re or electrical shock.
–
A damp or dusty location
–
A location exposed to smoke and steam, such as near a cookery
or humidifi er
–
A location exposed to rain or snow
–
A location near a water faucet or water
–
A location exposed to direct sunlight
–
A location subject to high temperatures
–
A location near open fl ames
•
When installing the machine, gently lower the machine to
the installation site so as not to catch your hands between
the machine and the fl oor or between the machine and other
equipment, as this may result in personal injury.
•
When connecting the interface cable, connect it properly by
following the instructions in this manual. If not connected
properly, this may result in malfunction or electrical shock.
•
When moving the machine, follow the instructions in this
manual to hold it correctly. Failure to do so may cause you to
drop the machine, resulting in personal injury.
•
Machines with a hard disk may not operate properly when
used at high altitudes of about 3,000 meters above sea level, or
higher.
Power Supply
WARNING
•
Do not damage or modify the power cord. Also, do not lace
heavy objects on the power cord or pull on or excessively bend
it. This can cause electrical damage, resulting in fi re or electrical
shock.
•
Keep the power cord away from all heat sources. Failure to do so
can cause the power cord insulation to melt, resulting in a fi re or
electrical shock.
•
The power cord should not be taut, as this may lead to a loose
connection and cause overheating, which could result in a fi re.
•
The power cord may become damaged if it is stepped on, fi xed
with staples, or if heavy objects are placed on it. Continued use
of a damaged power cord can lead to an accident, such as a fi re
or electrical shock.
•
Do not plug or unplug the power plug with wet hands, as this
can result in electrical shock.
•
Do not plug the power cord into a multiplug power strip, as this
can result in a fi re or electrical shock.
•
Do not bundle up or tie up the power cord in a knot, as this can
result in a fi re or electrical shock.
•
Insert the power plug completely into the AC power outlet.
Failure to do so can result in a fi re or electrical shock.
•
If excessive stress is applied to the connection part of the power
cord, it may damage the power cord or the wires inside the
machine may disconnect. This could result in a fi re. Avoid the
following situations:
–
Connecting and disconnecting the power cord frequently.
–
Tripping over the power cord.
–
The power cord is bent near the connection part, and
continuous stress is being applied to the power outlet or the
connection part.
–
Applying a shock to the power connector..
•
Do not use power cords other than the one provided, as this can
result in a fi re or electrical shock.
•
As a general rule, do not use extension cords. Using an
extension cord may result in a fi re or electrical shock.
•
Remove the power plug from the AC power outlet and refrain
from using the machine during a thunder storm. Lightning can
result in a fi re, electrical shock or malfunction.
CAUTION
•
Do not use a power supply voltage other than that listed herein,
as this may result in a fi re or electrical shock.
•
Always grasp the power plug when unplugging the power plug.
Do not pull on the power cord, as this may expose the core
wire of the power cord or damage the cord insulation, causing
electricity to leak, resulting in a fi re or electrical shock.
•
Leave suffi cient space around the power plug so that it can be
unplugged easily. If objects are placed around the power plug,
you may be unable to unplug it in an emergency.
Handling
WARNING
•
Do not disassemble or modify the machine. There are high-
temperature and high-voltage components inside the machine
which may result in a fi re or electrical shock.
•
Electrical equipment can be hazardous if not used properly.
Do not allow children to touch the power cord, cables, internal
gears, or electrical parts.
•
If the machine makes an unusual noise or emits smoke, heat, or
an unusual smell, immediately turn off the power switches of
the machine and computer and disconnect the interface cable
if it is connected. Then, unplug the power plug from the AC
power outlet and contact your local authorized Canon dealer.
Continued use can result in a fi re or electrical shock.
•
Do not use fl ammable sprays near the machine. If fl ammable
substances come into contact with electrical parts inside the
machine, this may result in a fi re or electrical shock.
•
Always turn off the power switches of the machine and
computer, and then unplug the power plug and interface cables
before moving the machine. Failure to do so can damage the