P.48 – Canon FAXPHONE L100 User Manual
Page 48
48
5
Press [
▲
] or [
▼
] to highlight
Delayed TX
01/01/2011 12:52AM
Off
On
6
Enter the time at which you want to send the document, and then press
[OK].
7
Specify a destination (
→
8
Press [
] (Start).
•
Your fax is sent at the specifi ed time.
Sending a Fax to an International Destination
(Adding Pauses)
When sending faxes to international destinations, it is sometimes diffi
cult to connect to a
recipient, due to the long distance that the signal must travel. You can insert a pause after
the international access code to reduce this problem.
1
Place documents (
→
p.16).
2
Switch to the Fax Mode (
→
3
Use the alphanumeric keys to enter the international access code.
•
For details about international access codes, contact your telephone service provider.
4
Press [
] (Pause) to enter a pause.
•
The letter <P>is displayed to indicate the pause.
•
The default pause added before the number is two seconds. To change the pause
time, see “
→
p.57).
•
To add another pause, press [
] (Pause) again.
5
Use the alphanumeric keys to enter the country code, area code, and fax
number.
6
Press [
] (Pause), and then press [OK].
•
A pause added to the end of the number is fi xed at 10 seconds.
7
Press [
] (Start).