Canon FAXPHONE L100 - Manual (Page 51)

51
Fa
x
Using the Machine for Fax Only
Set the fax receive mode to <Auto>.
1
Switch to the Fax Mode (
→
p.13).
2
Press [
▲
] or [
▼
] to highlight , and then press [OK].
3
Press [
▲
] or [
▼
] to highlight , and then press [OK].
RX Mode
Auto
Fax/Tel Auto Switch
Manual
Answer
When a Fax or Call Comes In
When a fax comes in, the machine automatically begins receiving the fax after two rings. If a
voice call comes in, the caller will hear a fax tone.
To change the number of rings before the machine receives a fax, press
[
] (Menu)  <Fax RX Settings>  <Fax Settings>  <Incoming
Ring>  <On>, and then specify the number of rings.
Using the Machine for Faxing and Phoning
Set the fax receive mode to <Fax/Tel Auto Switch>.
1
Switch to the Fax Mode (
→
p.13).
2
Press [
▲
] or [
▼
] to highlight , and then press [OK].
3
Press [
▲
] or [
▼
] to highlight < Fax/Tel Auto Switch>, and then press [OK].
RX Mode
Auto
Fax/Tel Auto Switch
Manual
Answer
4
Specify ring settings.
Time> Specify how long the machine will attempt to detect a fax tone
before the handset starts ringing ringing (4-30 seconds).
Ring Time> Specify how long the handset will ring during an incoming call
(15-300 seconds).
Specify how the machine should behave when an incoming call
is not answered:
•
: Disconnects the call.
•
: Receives a fax.
5
After you have specifi ed the setting, press [
▲
] or [
▼
] to highlight
, and then press [OK].