E “ Page 57
Page 57
57
Fa
x
Settings for Sending Faxes
Settings
Options
Bold: Default settings
Details
Register your machine name (the name of company or the
user) or a fax number for the machine.
The name and number that you register will appear at the top
of the fax.
Pulse
Tone
If you cannot send a fax, change the line type.
If you are not sure about your telephone line
type, contact your local telephone company.
Direct
Adapter 1
Adapter 2
If you cannot make a call or do not hear a ring tone when the
fax receive mode is set to <Fax/Tel Auto Switch> and an
external telephone or a handset is connected, change this
setting to <Adapter 1> or <Adapter 2>.
Off
On
-
Off -Hook Alarm Volume:
1 to 5
Specify whether or not to sound an alarm when the telephone
handset is off the hook. You can also set the volume of the
alarm.
Off
On
-
Print Location: On Image,
Above Image
-
Mark No. as TEL/FAX: FAX, TEL
Specify whether or not to include the sender ID at the top of
recipient’s faxes. Information such as your fax number and
name is included, enabling the recipient to recognize the
sender.
Sending Date/Time
Fax/Telephone Number
(FAX No.)
Page Number
Sender Name
(Unit Name)
Telephone Number
Mark
01/01/2011 02:07 PM FAX
123XXXXXXX
CANON
P.0001
You can specify frequently used settings as the default.
Off
On
The Error Correction Mode (ECM) automatically detects and
corrects errors during fax communication. Using the ECM
function can diminish send errors even over poor connections.
1 to 2 to 15 (seconds)
Specify the length of pauses added to fax destination
numbers.
Off
On
-
Redial Times: 1 to 2 to 10
(times)
-
Redial Interval: 2 to 99
(minutes)
-
Redial When Err Occurs: Off ,
On
Set auto redialing to automatically reattempt to connect to
a destination if the line is busy or an error occurs. You can
also specify the how many times to redial a number and the
interval between attempts.
Off
On
When sending a fax, you can specify whether or not to verify
the dial tone before dialing.