P. 1-35), Motion detection – Canon VB-C60 User Manual

Page 51

1-35

Setting the Image Buffer, Motion Detection, Audio Playback and Interval Timer (Event)

Det

led Set

tings

Motion Detection

(1) [Motion Detection Event]

Shows whether motion detection events are enabled/disabled. To change this setting, use

Motion Detection Setting Tool in VBAdmin Tools ( P. 2-34). When motion detection events

are enabled, the camera provides event notification to a viewer capable of displaying the

detected event, such as the Admin Viewer.

(2) [ON Event Operation]

Select the operation to be performed upon an ON event. If [Enable] is selected, (5), "Upload"

and (6), "E-mail Notification" are displayed. When the mode changes to [Detected] (ON

event), the process set in (5) or (6) is performed.

(3) [OFF Event Operation]

Select the operation to be performed upon an OFF event. If [Enable] is selected, (5), "Upload"

and (6), "E-mail Notification" are displayed. When the [Detected] mode is finished (OFF

event), the process set in (5) or (6) is performed.

(4) [Continuous Motion Operation]

Select the operation to be performed during motion detection. If [Enable] is selected, (5),

"Upload" and (6), "E-mail Notification" are displayed. When the mode changes to [Detected]

(detected period), the process set in (5) or (6) is performed.

Tip

Regardless of the image buffer frame rate setting, only a single image will be uploaded when

a timer event occurs.