Canon VB-C60 - Manual (Page 172)

5-8
List of Log Messages
A101 Invalid user name [notice]
A102 Invalid password [notice]
A111 Invalid host [notice]
A160 Recovery of pan/tilt subsystem [notice]
A201 Registered panorama image error [warning]
A250 Control error during camera initialization [warning]
A260 Slipped pan/tilt position [warning]
Description user not found (A101)
Meaning The camera was accessed by an unauthorized user.
Description user password mismatch (A102)
Meaning The password is invalid.
Description host access denied (A111)
Meaning The camera was accessed from a host from which access is prohibited.
Description recovered (A160)
Meaning The pan/tilt sub-system that had stopped functioning has recovered.
Remarks See A460.
Description corrupt panorama image - ignored (A201)
Meaning The panorama image is invalid.
Countermeasure Recapture a panorama image and register it again.
Remarks A file may have been registered while still open.
Description Camera control timeout - < Camera command> (A250)
Meaning
An initialization error occurred due to a command timeout (upright
position/on ceiling, initialization of camera platform, dome).
Countermeasure If the problem persists after rebooting the camera, the camera is faulty.
Description - c=< Error code> (A260)
Meaning The pan/tilt position has slipped.