Canon VB-C60 User Manual

Page 29

1-13

Setting the Date and Time (Date and Time)

Det

led Set

tings

[Synchronize with NTP server]

The camera will synchronize with that time of the NTP server. Enter the IP address of the

NTP server.

[Synchronize with NTP broadcast]

The camera will synchronize with the NTP broadcast time.

[Synchronize with computer time]

The camera will synchronize with the date and time of the computer currently accessing

the camera. The time zone will also be selected automatically.

(3) [Time Zone]

Select from the list an applicable time difference from the Greenwich Mean Time.

Tip

z If you select [Synchronize with computer time], clicking the [Apply] button to apply the

setting will set the setting shown under [Setting Method] to [Set manually].

z If [Synchronize with NTP Server] is selected, the date and time will not be changed when

the IP address of the NTP server is wrong or otherwise the NTP server cannot be

connected.

z The camera's NTP does not support IPv6.