Canon VB-C60 - Manual (Page 173)

5-9
List of Log Messages
Append
ix
A330 Video input error [err]
A350 Camera control system [err]
A450 Camera initialization failed [crit]
A460 Stopping of pan/tilt subsystem function [crit]
„ Application (uploader) messages
A004 Starting and stopping of uploader [info]
Description video input timeout - resetting (A330)
Meaning The video input has been reset because video input stopped.
Countermeasure
If the error occurs repeatedly, the camera is damaged. Contact our
Customer Service Center.
Description camera status timeout - resetting (A350)
Meaning
The camera control system has been reset due to a communication
timeout with the camera.
Countermeasure
If the error occurs repeatedly, the camera is damaged. Contact our
Customer Service Center.
Description camera initialization failed - (A450)
Meaning
The camera control function has stopped because the camera control
system could not be initialized.
Countermeasure
If the error persists after rebooting the camera, the camera is damaged.
Contact our Customer Service Center.
Description stopped - c=< Error code> (A460)
Meaning
An error occurred during pan/tilt control, so the control function was
disabled.
Countermeasure
If the error persists after rebooting the camera, the camera is damaged.
Contact our Customer Service Center.
Remarks
To reset the error, send http://[IP address]/-wvhttp-01-/platformreset (if the
camera is not damaged.)
Description %1 uploader (A004)
%1 Starting or stopping.
Meaning The uploader was started or stopped.