Canon VB-C60 - Manual (Page 109)

2-43
Motion Detection Setting Tool
V
B
A
dmin T
ools
If a motion corresponding to [Size] or greater has remained detected for the specified
duration or longer, the mode changes to [Detected] and a peak block is displayed. Even
when the specified size becomes no longer met in the [Detected] mode where a peak block is
still displayed, the [Detected] mode will be maintained for the specified duration.
Setting the Motion Detection Sensitivity While Checking the Recorded Video
To set the motion detection level at which the camera mode will change to [Detected], you
can adjust the settings while checking the actual motion in the viewer. The camera lets you
set a desired motion detection level while playing the live video recorded in the Live tab (
P. 2-35), so you need not repeat the actual motion in front of the camera.
* If you are using Windows Vista without SP1, recording by Motion Detection Setting Tool
may not be possible.
1. Selecting [Video recording options] from [Tools] in the menu bar opens the Video recording
options dialog box.
Video recording options dialog box
(1)[Maximum recording time]
Set the maximum recording time. Set a desired value in a range of 60 to 300 seconds.
(2)[Self-timer]
Set the time after clicking the Rec. Start button when recording will be started. Set a
desired value in a range of 0 to 30 seconds.
Detected
(Motion level)
Set value or bigger
Less than the set value
Indicator color
Detection status
Duration Duration
Time
Green Green Yellow
Peak block display (in red)
Not detected Not detected