Canon VB-C60 - Manual (Page 100)

2-34
Motion Detection Setting Tool
This tool is used to set the motion detection function that performs upload, notifies the viewer,
records a log, etc., if a change has occurred in the captured image due to movement of a
subject. You can set the position and size of the motion detection area, detection judgment
conditions, etc., while checking the image on the camera.
The Motion Detection function determines the following items to specify when the camera mode
should change to [Detected] and the specified operations such as event upload should be
performed, upon change in the viewer image inside the motion detection area: (1) [Sensitivity]
indicating the degree of change, (2) [Size] indicating the ratio of the changed area, and (3)
[Duration] indicating how long the change continues.
Note
Notes on Use of This Camera
The Motion Detection function is not suitable in applications where high
reliability is required. If high reliability is always required for monitoring, etc., it is
recommended that you don't use this function. Canon shall assume no liability
for any accident, loss or other undesirable outcomes resulting from operating the
motion detection function.
You can set the Motion Detection
function with ease using Motion
Detection Setting Tool.