Canon VB-C60 - Manual (Page 48)

1-32
Setting the Image Server, Audio Server and HTTP Server (Server)
Note
Switch [Line In] and [Microphone In] on each setting page according to the
specification of the microphone ( P. 1-31).
If a wrong input is used, the camera or microphone may be damaged. Be sure to
set the correct input.
Note
z The volume, sound quality, etc., may change depending on the characteristics of the
microphone used.
z To output audio from the audio output terminal of the camera, send audio from RM-Lite
Viewer. Audio cannot be sent from VB-C60 Viewer See "Audio Transmission/Reception
(Two-way Communication)" in RM-Lite Viewer ( Start Guide).
z Connect a speaker with an amplifier to the camera. See "Audio Input/Output Terminals" ( Start
Guide).
z If [Enable] is selected under [Echo Canceller], the sound quality or volume may be
affected. Utilize this function as necessary according to the installation environment and
how the camera is used.
z To transmit audio, read "Notes" in "Audio Input/Output Terminals" of Start Guide carefully.
• Audio Transmission
• Input Volume
• Voice Activity Detection
• Echo Canceller
• Audio Reception
• Output Volume