Canon VB-C60 User Manual

Page 32

1-16

Setting the Camera Control and External Device Name (Camera)

Note

z Where an outdoor scene is captured from inside a room through a glass window, etc., the

camera may focus on the glass surface if there is dust or water on the glass surface. In this

case, use the camera by installing it at the shortest possible distance (within 30 cm) from

the glass surface.

z The initial camera settings (1) and (2) define the defaults that apply when the camera is

started. Setting changes will be reflected only after the camera is reconnected or camera is

rebooted.

Specify the settings used in the actual operating environment, using Control for Admin in

z If the subject is a traffic signal, electronic scoreboard, etc., the captured image may flicker.

In this case, try changing the [AE Mode] setting to [Auto (Shutter-priority AE)] and selecting

a shutter speed lower than 1/100, to see if the problem improves.