Setting the exposure, Setting the exposure -27 – Canon VB-C60 User Manual

Page 143

3-27

Performing Operations and Settings as the Administrator

VB
-C60 Vie

Setting the Exposure

You can set various options relating to exposure operation.

(1) Exposure Mode

Select [Auto], [Manual], [Auto (Flickerless)] or [Auto (Shutter-priority AE)].

If [Auto] was selected for [Day/Night] under [Camera] on the setting page ( P. 1-19), select

[Auto ], [Auto (Flickerless)] or [Auto (Shutter-priority AE)].

For explanation on each item set in the exposure mode, see the setting page ( P. 1-15).

Note

z Even when the focus mode is changed using Admin Viewer, it is not reflected in the

settings on the setting page.

z Take note that if manual focus is set, the focus will remain fixed.

z When the focus is set using Admin Viewer, the focus mode of other users will also change

to the same mode.

z If a shutter speed of 1/1 to 1/4 is selected in the manual exposure mode ( P. 3-27), the

[Auto] and [One-shot AF] focus modes of camera control are disabled. Switch the focus

mode to [Manual] to bring the subject into focus.

z Refer to the memo in P. 1-17 for the focus range that applies when the Night Mode ( P. 1-

(2)

(3)

(4)

(1)