Canon imagePROGRAF iPF765 MFP M40 - Manual (Page 710)

Paper Size
Sheets ISO A0, ISO A1, ISO A2+, ISO A2, ISO A3+, ISO A3, ISO A4, ISO B1, ISO B2,
ISO B3, ISO B4, JIS B1, JIS B2, JIS B3, JIS B4, 34"x44" (ANSI E), 28"x40" (AN-
SI F), 22"x34"(ANSI D), 17"x22"(ANSI C), 13"x19" (Super B), 11"x17" (Ledger),
Legal (8.5"x14"), Letter (8.5"x11"), 36"x48" (ARCH E), 30"x42" (ARCH E1),
26"x38" (ARCH E2), 27"x39" (ARCH E3), 24"x36" (ARCH D), 18"x24" (ARCH
C), 12"x18" (ARCH B), 9"x12" (ARCH A), DIN C0, DIN C1, DIN C2, DIN C3, DIN
C4, 20"x24", 18"x22", 14"x17", 12"x16", 10"x12", 10"x15", US Photo 16"x20",
Poster 20"x30", Poster 30"x40", 13"x22", and Poster 300x900mm
Print area Normal size Printable area
• Rolls
3 mm (0.12 in) from each side
• Sheets
3 mm (0.12 in) from the top, 23 mm (0.91 in) from the bottom, and 3mm (0.12
in) from the left and right sides
For information on the recommended print area, see "Print Area." →P.710
Borderless printing (*2) Printable area (rolls)
0 mm from the top, 0 from the bottom, and 0 mm from the left and right sides
Supported width for borderless printing 36-in. Roll (914.4mm), ISO A0/A1 Roll (841.0mm), JIS B1/B2 Roll (728.0mm),
24-in. Roll (609.6mm), ISO A1/A2 Roll (594.0mm), JIS B2/B3 Roll (515.0mm),
17-in. Roll (431.8mm), ISO A2/A3 Roll (420.0mm), 14-in. Roll (355.6mm),
300mm Roll (300.0mm), ISO A3/A4 Roll (297.0mm), JIS B4 Roll (257.0mm), and
10-in. Roll (254.0mm)
*1: Printing may not be possible in some cases, depending on the type and size of paper.
*2: Varies depending on the operating system or application.
Options
Roll Holder Set RH2-33
Print Area Print Area
A margin required by the printer is added with respect to the size of paper loaded in the printer. Except in borderless
printing, the actual printing area corresponds to the paper size minus the space for this margin.
Note
• Printable Area: The area that can be printed.
• There is no margin (that is, a margin of 0 mm) during borderless printing on rolls.
• Recommended Print Area: We recommend printing within this area.
• To print so that your original matches the print area exactly, use an oversized paper size that includes the required margin.
(See "Printing on Oversized Paper.")
→P.86
Margins of Printable Area Margins of Recommended Print Area
Top Edge Bottom Edge Sides Top Edge Bottom Edge Sides
Sheets 3 mm (0.12 in) 23 mm (0.91 in) 3 mm (0.12 in) 20 mm (0.79 in) 23 mm (0.91 in) 5 mm (0.20 in)
Rolls 0/3 mm (0/0.12 in) 0/3 mm (0/0.12 in) 0/3 mm (0/0.12 in) 20 mm (0.79 in) 5 mm (0.20 in) 5 mm (0.20 in)
Print Area iPF765
User's Guide
Specifications
Printer Specifications
710