Canon imagePROGRAF iPF765 MFP M40 User Manual
Page 505
Setting Item
Description, Instructions
GL2 Set-
tings
Paper
Manager
Auto Rotate
If the long side of an original is shorter than the roll width, the
original is automatically rotated 90 degrees to conserve paper.
Similarly, if the long side of an original in landscape orientation
is longer than the roll width and the short side is shorter than
the roll width, the original is repositioned to fit on the paper.
HP RTL print jobs are not rotated. Because HP RTL images
are not rotated even if the paper is rotated 90 degrees, images
may be cut off or the blank paper may be ejected. In this case,
set Auto Rotate to Off.
Nesting
Use Nesting
Selecting On will store print jobs until multiple documents can
be arranged to fill up the roll width, instead of printing each
print job as it is received.
Nesting WaitTime
Specify a time to wait until printing, as desired.
Cut Lines
Select On to print cut lines between each document on the roll.
Line &
Pen
Manager
Enable merge
Specify whether to merge or print over colors where lines over-
lap.
Choose Off to print the second line over the first. Choose On
to merge all overlapping colors.
Pen Set-
up
Select Palette
As pen values, choose Software, Palette A, Palette B, or
Factory.
Choose Software to print according to software settings.
Choose Palette A or Palette B to print using the value speci-
fied in Define Palette.
Define Palette
Specify the Width, Color, and Line Attributes in the palette
Pen no.. Choose Factory to confirm the values when Factory
is selected in Select Palette.
In Line Attributes, choose No Setting or Circle Setting as
the processing for the ends and junctions of lines.
•
If you choose No Setting
•
If you choose Circle Setting
Reset Palette
Restore Define Palette to the default palette settings.
Smoothing
Choose whether to print arcs as smooth curved lines or as
multiple connected line segments.
iPF765
Menu Settings
Control Panel
Printer Menu
505