P.336 – Canon imagePROGRAF iPF765 MFP M40 User Manual
Page 336
•
A
Media Type
Select the paper type.
For information on the types of paper the printer supports, refer to the Paper Reference Guide.(See "Types of Pa-
per
")
•
B
Drying Time
Specify the time that the printer waits for ink to dry, as needed. The Drying Time setting is only valid for rolls.
•
(See "Specifying the Ink Drying Time for Rolls
•
C
Between Pages
Specify the time the printer waits after printing a page until ejecting the paper, as needed.
•
D
Between Scans
Specify the time the printer waits after printing a line on the page until printing the next line, as needed.
•
E
Roll Paper Margin for Safety
You can specify the length of a margin on the leading edge of paper to ensure that paper susceptible to curling is
held firmly against the Platen.
•
F
Near End Margin
Specify the length of the Near End Margin (the leading edge margin) of the roll, as needed.
•
G
Cut Speed
Select the speed of automatic cutting, as needed. You can adjust this setting if paper is not cut well when automat-
ic cutting is used.
•
H
Automatic Cutting
You can activate or deactivate automatic cutting and printing of cut lines, as desired. In this list, specify Printer
Default, None, or Print Cut Guideline.
•
J
Mirror
Specify whether to print a mirror image, as needed. Select this option to print a version of the document or image
with the left and right sides inverted.
View settings Dialog Box for the Printing Application
View settings Dialog Box for the Printing Application
In the View settings dialog box, you can check details of the selected printing application.
Note
•
To display the View settings dialog box, on the Main pane, click View settings by Print Target.(See "Main Pane
")
View settings Dialog Box for the Printing Application
iPF765
Mac OS X Software
Printer Driver
336