Canon imagePROGRAF iPF765 MFP M40 - Manual (Page 677)

HP-GL/2 jobs are printed at maximum size, even if a standard size is specified HP-GL/2 jobs are printed at maximum size, even if a standard size is specified
Cause Corrective Action
The page size of the HP-GL/2 print job, as created in the
source application, is incorrect. In the Control Panel menu, set PageSizeProcess2 or Conserve Paper to On.
The layout will be changed to the optimal layout.
(See "Menu Settings.")
→P.500
HP-GL/2 printing takes a long time HP-GL/2 printing takes a long time
Cause Corrective Action
Large print jobs with a lot of data take longer to print. Please wait a while until printing is finished.
A job was printed when Input Resolution in the Control Panel
menu was set to 600dpi. In the Control Panel menu, set Input Resolution to 300dpi and print
again.
(See "Menu Settings.")
→P.500
The printer stops when printing a HP-GL/2 job (the carriage stops moving) The printer stops when printing a HP-GL/2 job (the carriage stops moving)
Cause Corrective Action
The printer is analyzing the print job. Please wait a while until printing is finished.
A job was printed when Input Resolution in the Control Panel
menu was set to 600dpi. In the Control Panel menu, set Input Resolution to 300dpi and print again.
(See "Menu Settings.")
→P.500
iPF765 HP-GL/2 jobs are printed at maximum size, even if a standard size is specified
User's Guide
Troubleshooting
HP-GL/2 problems
677