Printing from a desired starting point – Canon imagePROGRAF iPF765 MFP M40 User Manual
Page 467
4
Move the Width Guide (a) carefully to match the size of pa-
per loaded.
Set the Width Guide against the edge of the paper to prevent
the paper from becoming crooked or wrinkled.
5
Press the OK button.
•
If a print job was received
The printer now starts printing the print job.
•
If no print job was received
A menu for selection of the type of paper is automatically shown on the Display Screen.
Press ▲ or ▼ to select the type of paper, and then press the OK button.
The printer now starts feeding the paper.
Note
•
For details on types of paper to select, see the Paper Reference Guide. (See "Types of Paper.")
Printing From a Desired Starting Point
Printing From a Desired Starting Point
When printing inside boundaries or in other situations when you want to specify a particular position to start printing
from, set Width Detection to Off in the printer menu for the type of paper used.
Set Width Detection to Off
1
On the Tab Selection screen of the Control Panel, press
◀ or ▶ to se-
lect the Paper tab (
).
Note
•
If the Tab Selection screen is not displayed, press the Menu button.
iPF765
Printing From a Desired Starting Point
Handling Paper
Handling sheets
467