Canon imagePROGRAF iPF765 MFP M40 - Manual (Page 458)

3
In the Paper Detailed Settings dialog box displayed
next, select the desired settings values in
C Between
Pages and D Between Scans in B Drying Time, and
then click OK.
(See "Paper Detailed Settings Dialog Box(Mac OS X).")
→P.335
Specifying the Cutting Method for Rolls Specifying the Cutting Method for Rolls
How rolls are cut after ejection varies depending on printer settings.
Cutting Method Printer Setting Driver Setting
Automatic The roll is automatically cut by the Cutter Unit following
printer driver settings. Media
Menu > Pa-
per Details
> (Various
Types of
Paper) >
Cutting
Mode Automatic Auto Cut Yes
Eject Choose this setting if you prefer not to have documents
dropped immediately after printing, as when waiting for
ink to dry.
To cut the roll with the Cutter Unit, press the Cut but-
ton. Eject Yes
Manual Choose this setting when using media that cannot be
cut using the Cutter Unit.
Cut each page from the roll using scissors. For continu-
ous printing (if you will cut each page later), select Auto
Cut > Yes or select Print Cut Guideline.
(See "Cutting Roll Paper After Printing.")
→P.171
Manual No Yes Print Cut
Guideline
Paper Cut-
ting Choose this option if you want to cut pages by pressing
Cutter Unit buttons for manual cutting after printing
when Auto Cut > No is selected or Print Cut Guide-
line is selected in the printer driver.
Otherwise choose this option if you want to cut the roll
edge after loading a roll. Cut button
pressed Yes No Print Cut
Guideline
Note
• Automatic and Eject are valid only when you have selected Auto Cut > Yes in the printer driver.
• With Eject, printing does not resume after a series of jobs have been printed continuously until the roll is cut.
• Eject is the preset selection in Cutting Mode for some types of paper. For this paper, we recommend keeping the preset
cutting mode.
Cut rolls manually in the following cases:
Specifying the Cutting Method for Rolls iPF765
User's Guide
Handling Paper
Handling rolls
458