Printing from autocad – Canon imagePROGRAF iPF9400S User Manual
Page 58
11
Make sure the width of the loaded roll is displayed in the
B
Roll Width list—in this case, ISO A2/A3
(420.0mm).
Note
•
If the width of the roll loaded in the printer is not shown in
B
Roll Width, click
L
Printer Information on the Main
pane to update the printer information.
12
Make sure
C
Page Size on the Page Setup pane
shows the original size as specified in
C
Paper Size in
the Page Attributes dialog box—in this case, ISO A3.
13
Specify additional printing conditions.
For details on available printing conditions, see "Printer Driver Settings
"
14
Confirm the print settings, and then click
M
Print to start printing.
Note
•
For tips on confirming print settings, see "Confirming Print Settings
•
You can conserve roll paper by configuring settings suitable for the document.
For details on how to conserve paper and print, refer to "Conserving Roll Paper by Rotating Originals 90 De-
grees
Printing from AutoCAD
Printing from AutoCAD
Printer Driver Optimization Module for AutoCAD is software for printing optimally from AutoCAD with the printer driver.
By optimally controlling the processing resolution of raster data and the memory to be used in image processing of
AutoCAD, printing superior in reliability and productivity is realized.
If you install Printer Driver Optimization Module for AutoCAD on a computer on which supported AutoCAD is installed,
it will be installed automatically.
Note
•
Printer Driver Optimization Module for AutoCAD is applied automatically when you print from AutoCAD, and optimal printing is
performed.
Printing from AutoCAD
iPF9400S
Enhanced Printing Options
Printing CAD Drawings
58