Canon imagePROGRAF iPF9400S - Manual (Page 559)

10
Print the job.
The printer stops advancing the paper after printing.
Note
• The printer can continue to receive print jobs from computers. If a print job is received and printed here, it can be
printed without the margin of about 10 cm being created at the paper leading edge.
11
Press the Feed button.
Roll paper is fed to the specified cut position and then
automatically stopped.
12
Cut the roll paper manually with scissors or the like.
Important
• Cut at the dotted line printed on the paper. If you cut on the printer side of the dotted line, the paper leading edge
may rub against the printhead and may deviate from the paper retainer.
13
Press the OK button.
After the roll is rewound, it stops automatically.
iPF9400S Specifying the Cutting Method for Rolls
User's Guide
Handling and Use of Paper
Handling rolls
559