Specifying paper in the printer driver, Specifying paper in the printer driver (mac os x), P.366 – Canon imagePROGRAF iPF9400S User Manual
Page 366
Specifying Paper in the Printer Driver
Specifying Paper in the Printer Driver
If you have replaced the paper, you must complete the following settings in the printer driver.
1
This sets the
B
Format for and
C
Paper Size.
Note
•
The configuration method varies depending on the OS and
application software you are using.
If Page Setup is displayed in the application menu, the set-
tings are configured by opening the Page Attributes dialog
box from Page Setup.
If it is not displayed, the settings are configured in the up-
per part of the printer driver displayed when you select
Print from the application software menu.
2
Select the printer in the
A
Printer list.
3
Choose the original size in the
F
Paper Size list.
4
If you configured the settings using the Page Attributes dialog box, click
F
OK to close the dialog box, and
then select Print from the application software menu.
5
Access the Main pane.
6
In the
A
Media Type list, select the type of paper that is loaded.
Specifying Paper in the Printer Driver (Mac OS X)
iPF9400S
Mac OS X Software
Printer Driver
366