Brother DCP-9045CDN User Manual
Page 93
Troubleshooting and routine maintenance
79
C
White lines or ribbing down the
page on duplex print
Note
Position B is only for duplex
printing with recycled paper
when the temperature and
humidity are low.
Choose Thin Paper mode in the printer driver and re-send the print
job.
If the problem is not solved after printing a few pages, follow these
steps:
a
Open the back cover.
b
Pull down the two gray levers, one on the left-hand side and one
on the right-hand side, to position B as shown in the illustration
below.
c
Close the back cover.
d
Choose Plain Paper mode in the printer driver and re-send the
print job.
e
If the problem is not solved after printing a few pages, choose
Thin Paper mode in the printer driver and re-send the print job.
Note
When you have finished printing, open the back cover and reset the
two gray levers back to the original position.
Use thicker paper than you are now using.
Examples of poor print
quality
Recommendation
ABCDEFGHIJKLMNOPQRSTUVWXYZ. 0123456789. abcdefghijklmnopqrstuvwxyz.
ABCDEFGHIJKLMNOPQRSTUVWXYZ. 0123456789. abcdefghijklmnopqrstuvwxyz.
ABCDEFGHIJKLMNOPQRSTUVWXYZ. 0123456789. abcdefghijklmnopqrstuvwxyz.
ABCDEFGHIJKLMNOPQRSTUVWXYZ. 0123456789. abcdefghijklmnopqrstuvwxyz.