Printing images – Brother DCP-9045CDN User Manual
Page 55
Printing photos from a digital camera
41
6
a
Press Menu, 4, 3.
43.PictBridge
1.Paper Size
2.Orientation
3.Date & Time
Select ab or OK
b
To set the PictBridge settings, press a or
b
to choose 1.Paper Size,
2.Orientation, 3.Date & Time,
4.File Name, or 5.Print Quality.
Press OK.
c
Press a or b to choose an option for
each menu setting.
Press OK.
d
Press Stop/Exit.
Repeat b to c for each PictBridge
setting.
Note
• Camera settings are prioritized as long as
your camera is not set to use your
machine’s settings (default settings). If
your camera is set to use your machine’s
settings, the machine will print your photo
using the settings below.
• Please refer to the documentation
supplied with your camera for more
detailed information on changing
PictBridge settings.
Printing images
6
a
Make sure that your camera is turned
off. Connect your camera to the USB
direct interface (1) on the front of the
machine using a suitable USB cable.
b
Turn on the camera. Make sure your
camera is in PictBridge mode.
When the machine has recognized the
camera, the LCD shows the following
message depending on which mode the
machine is in:
aScan to FTP
Scan to E-mail
Scan to Image
bScan to OCR
Select ab or OK
c
Set your camera to print an image. Set
the number of copies if you are asked.
When the machine starts printing an
image, the LCD will shows the following
message:
PictBridge
Printing. Keep...
Note
Please refer to the documentation
supplied with your camera for detailed
operations how to print using PictBridge.
Machine settings
Default settings
Paper Size
Letter
Orientation
Portrait
Date & Time
Off
File Name
Off
Print Quality
Normal
1