Brother DCP-9045CDN - Manual (Page 30)

Chapter 2
16
Unprintable area when
printing from a computer
2
When using the default driver the printable
area is smaller than the paper size, as shown
below.
Portrait
1 0.16 in. (4.23 mm)
2 0.16 in. (4.23 mm)
Landscape
1 0.16 in. (4.23 mm)
2 0.16 in. (4.23 mm)
Note
The unprintable area shown above is for
Letter size paper. The unprintable area
changes with the paper size.
Loading paper and
envelopes
2
The machine can feed paper from the
standard paper tray, optional lower tray or
multi-purpose tray.
When printing on plain paper 16 to 28 lb
(60 to 105 g/m
2
) use the paper tray.
For printing on other types of media use the
MP tray (multi-purpose tray).
When you put paper into the paper tray, note
the following:
„ If your application software supports
paper size selection on the print menu,
you can select it through the software. If
your application software does not
support it, you can set the paper size in
the printer driver or by using the control
panel buttons.
„ Before using paper that has holes in it,
such as organizer sheets, you must ‘fan’
the stack to avoid paper jams and
misfeeds.
2 2
1
1
2 2
1
1