Brother DCP-9045CDN - Manual (Page 41)

Security features
27
4
Turning Secure Function Lock on/off
4
If you enter the wrong password when
following the instructions below, the LCD will
show Wrong Password. Re-enter the
correct password.
Turning Secure Function Lock on
4
a
Press Menu, 1, 8.
18.Function Lock
a
Lock OffiOn
Set Password
b
Setup User
Select ab or OK
b
Press a or b to select Lock OffiOn.
Press OK.
c
Enter your four-digit administrator
password. Press OK.
Turning Secure Function Lock off
4
a
Press Menu, 1, 8.
18.Function Lock
a Lock OniOff
b Change User
Select ab or OK
b
Press a or b to select Lock OniOff.
Press OK.
c
Enter your four-digit administrator
password.
Press OK.
Switching Users
4
This setting allows a restricted user to log on
the machine when Secure Function Lock is
turned on.
Note
After a restricted user has finished using
the machine, it will return to the Public
setting in one minute.
a
Hold down d as you press Secure.
Function Lock
Change User
PIN:XXXX
Pls enter PIN
b
Enter your four-digit password.
Press OK.
When Copy mode is disabled:
a
Press Duplex, Start, numeric key or
one of the copy setting buttons.
Access Denied
PIN:XXXX
Pls enter PIN
b
Enter your four-digit password.
Press OK.
When Scan mode is disabled:
a
Press Scan key.
Access Denied
PIN:XXXX
Pls enter PIN
b
Enter your four-digit password.
Press OK.