Brother DCP-9045CDN - Manual (Page 148)

134
2
Push the drum unit in until it stops.
i
Close the front cover of the machine.
When you replace the belt unit with a
new one, you need to reset the belt unit
counter by completing the following
steps:
j
Turn on the machine’s power switch.
k
Press Menu, 6, 6.
The LCD shows the part name of the
counter that needs to be reset.
66.Reset Menu
Belt Unit
Select ab or OK
l
Press a or b to choose Belt Unit.
Press OK.
m
Press 1 to reset the belt unit counter.
n
Press Stop/Exit.
Replacing the waste toner
box
C
Order Number: WT-100CL
Change Parts Waste Toner Box
message
C
After you have printed approximately 20,000
images at 5% coverage for CMYK each, you
must change the waste toner box. The actual
number of printed pages will vary depending
on the print jobs and paper you use.
Change Parts
Waste Toner Box
Waste Toner Box Full message
C
When the waste toner box is full, the following
message appears on the LCD and the
machine will stop printing. When you see this
message, you must replace the toner box:
Waste Toner Full