Brother DCP-9045CDN - Manual (Page 113)

Troubleshooting and routine maintenance
99
C
e
Wipe the inside of the paper tray with a
dry, lint-free cloth to remove dust.
f
Re-load the paper and put the paper tray
firmly back in the machine.
g
Plug the machine’s power cord back into
the AC power outlet first, and reconnect
all cables.Turn on the machine’s power
switch.
Cleaning the scanner
C
a
Turn off the machine’s power switch.
Disconnect all cables, and then unplug
the power cord from the AC power
outlet.
b
Lift the document cover (1).
Clean the white plastic surface (2) and
scanner glass (3) underneath it with a
soft lint-free cloth moistened with a
non-flammable glass cleaner.
c
In the ADF unit, clean the white bar (1)
and the scanner glass strip (2)
underneath it with a soft lint-free cloth
moistened with a non-flammable glass
cleaner.
d
Plug the machine’s power cord back into
the AC power outlet first, and reconnect
all cables.Turn on the machine’s power
switch.
Note
In addition to cleaning the scanner glass
and glass strip with a non-flammable glass
cleaner, run your finger tip over the glass
to see if you can feel anything on it. If you
feel dirt or debris, clean the glass again
concentrating on that area. You may need
to repeat the cleaning process three or
four times. To test, make a copy after each
cleaning.
1
3
2
2
1