Brother DCP-9045CDN - Manual (Page 38)

Chapter 3
24
Sleep time
3
Setting the sleep time reduces power
consumption by turning off the fuser while the
machine is idle.
You can choose how long the machine must
be idle (from 000 to 240 minutes) before it
goes into sleep mode. When the machine
receives computer data or makes a copy, the
timer will be reset. The default setting is 005
minutes.
While the machine is in sleep mode the LCD
will display Sleep. When printing or copying
in sleep mode, there will be a short delay
while the fuser warms up.
a
Press Menu, 1, 5, 2.
15.Ecology
2.Sleep Time
005Min
Enter & OK Key
b
Enter the length of time the machine is
idle before entering sleep mode (000 to
240).
Press OK.
c
Press Stop/Exit.
Turning off the scanner lamp
3
The scanner lamp stays on for 30 minutes
before automatically switching off to preserve
the life of the lamp and reduce power
consumption.
To turn the scanner lamp off manually press
the d and c keys simultaneously. The scanner
lamp will remain turned off until the next time
you use the scanning feature.
Note
Turning the lamp off regularly will reduce
the lamp’s life.
LCD contrast
3
You can change the contrast to make the
LCD look lighter or darker.
a
Press Menu, 1, 7.
17.LCD Contrast
-nnonn+
Select d c & OK
b
Press d to make the LCD darker. Or,
press c to make the LCD lighter.
Press OK.
c
Press Stop/Exit.
User Settings List
3
You can print a list of the settings you
programmed including the network
configuration.
a
Press Menu, 6, 4.
64.User Settings
Press Start
b
Press Black Start or Color Start.
c
Press Stop/Exit.