Brother DCP-9045CDN - Manual (Page 54)

40
6
Your Brother machine supports the
PictBridge standard, allowing you to connect
to and print photos directly from any
PictBridge compatible digital camera.
If your camera is using the USB Mass
Storage standard, you can also print photos
from a digital camera without PictBridge.
(See Connecting a camera as a storage
device on page 42.)
Before using
PictBridge
6
PictBridge requirements
6
To avoid errors, remember the following
points:
„ The machine and the digital camera must
be connected using a suitable USB cable.
„ The image file must be taken with the
digital camera you want to connect to the
machine.
Using PictBridge
6
Setting your digital camera
6
Make sure your camera is in PictBridge
mode. The following PictBridge settings may
be available from the LCD of your PictBridge
compatible camera. Depending on your
camera some of these settings may not be
available.
„ Copies
„ Quality
„ Paper size
„ Date print
„ File name print
„ Layout
Note
The names and availability of each setting
depends on the specification of your
camera.
You can also set the following PictBridge
settings by using the control panel.
1 If you choose the paper size Letter, A4 or B5, Portrait
will be chosen. If you choose A5, B6 or A6,
Landscape will be chosen.
Printing photos from a digital
camera
6
Menu selections Options
Paper Size Letter, A4, B5, A5, B6, A6
Orientation
Portrait, Landscape 1
Date & Time Off, On
File Name Off, On
Print Quality Normal, Fine