Brother DCP-9045CDN - Manual (Page 33)

Loading paper and documents
19
2
Loading documents
2
You can make copies, and scan from the ADF
(automatic document feeder) and from the
scanner glass.
Using the ADF (automatic
document feeder)
2
The ADF can hold up to 50 pages and feeds
each sheet individually. Use standard 20 lb
(80 g/m
2
) paper and always fan the pages
before putting them in the ADF.
Make sure documents written with ink are
completely dry.
CAUTION
DO NOT leave thick documents on the
scanner glass. If you do this, the ADF may
jam.
DO NOT use paper that is curled, wrinkled,
folded, ripped, stapled, paper-clipped,
pasted or taped.
DO NOT use cardboard, newspaper or
fabric.
a
Unfold the ADF document output
support flap (1) and the ADF support
flap (2).
b
Fan the pages well.
c
Place your document, face up top edge
first, in the ADF until you feel it touch the
feed roller. The LCD will show
ADF Ready.
d
Adjust the paper guides to fit the width of
your document.
CAUTION
To avoid damaging your machine while
using the ADF, DO NOT pull on the
document while it is feeding.
To scan non-standard documents see
Using the scanner glass on page 20.
1
2