Brother DCP-9045CDN - Manual (Page 155)

Troubleshooting and routine maintenance
141
C
Packing and shipping
the machine
C
If for any reason you must move or ship your
machine, carefully re-pack the machine in the
original packing material to avoid any
damage during transport. If you do not pack
the machine properly, you could void your
warranty. The machine should be adequately
insured with the carrier.
If the machine must be shipped, please read the
instructions in this section which explains how
to properly prepare your machine for transport.
WARNING
Once your machine has been set up and
used, we do not recommend that it be moved
or shipped unless absolutely necessary.
Color laser printers are complex printing
devices. Moving the machine or shipping it
without properly removing the installed
supplies can result in SEVERE damage to
the machine. As a result, your machine may
not operate properly afterwards.
Failure to properly prepare the machine for
shipping according to the instructions in this
section may
VOID YOUR WARRANTY.
To prevent injuries when moving or lifting this
machine, make sure at least two people lift
the machine together. Be careful not to pinch
your fingers when you put the machine down.
Make sure that you have the following parts
for repacking:
1 Insertion sheet for repacking
2 Plastic bag for the waste toner box
3 Orange protective cover and plastic bag
that the toner cartridge originally came in
(4 pieces of each)
4 Orange packing material for locking the
drum unit and the belt unit (4 pieces)
5 A piece of paper (Letter or A4) to protect the
belt unit (supplied by the user)
6 Joints for attaching cartons (4 pieces)