Brother ADS-1000W - Manual (Page 8)

Changing Your Network Settings
5
2
c
Double-click your Brother scanner.
 Windows
®
 Macintosh
NOTE
• If the scan server is set to its factory settings (if you do not use a DHCP/BOOTP/RARP server), the device
will appear as Unconfigured in the BRAdmin Light utility screen.
• (ADS-1000W/ADS-1100W)
You can find your machine’s MAC Address (Ethernet Address) in Network Status from the Network tab,
and Node Name in TCP/IP (Wireless) in Wireless from the Network tab, in Web Based Management. See
Configure the Machine Settings Using Web Based Management (Web Browser) on page 38.
(ADS-1500W/ADS-1600W)
You can display your machine’s MAC Address (Ethernet Address) and Node Name using the machine’s
LCD. To find the MAC Address, press
(Settings) > Network > WLAN > MAC Address. To find the
Node Name, press (Settings) > Network > WLAN > TCP/IP > Node Name.