Brother ADS-1000W - Manual (Page 68)

Additional Network Settings (for Windows ® )
65
8
Network Scanning Installation for Infrastructure Mode When
Using Vertical Pairing (Windows
®
7 and Windows
®
8)
8
Windows
®
Vertical Pairing is a technology to allow your Vertical Pairing supported wireless machine to
connect to your Infrastructure network using the PIN Method of WPS and the Web Services feature. This also
enables the scanner driver installation from the scanner icon in the Add a device screen.
If you are in Infrastructure mode, you can connect your machine to the wireless network and then install the
scanner driver using this feature. Follow the steps below:
NOTE
• If you have set your machine’s Web Services feature to Off, you must set it back to On. The default setting
of the Web Services for the Brother machine is On. You can change the Web Services setting by using
Web Based Management (web browser) or BRAdmin Professional 3.
• Make sure your WLAN access point/router includes the Windows
®
7 or Windows
®
8 compatibility logo. If
you are not sure about the compatibility logo, contact your access point/router manufacturer.
• Make sure your computer includes the Windows
®
7 or Windows
®
8 compatibility logo. If you are not sure
about the compatibility logo, contact your computer manufacturer.
• If you are configuring your wireless network using an external wireless NIC (Network Interface Card),
make sure the wireless NIC includes the Windows
®
7 or Windows
®
8 compatibility logo. For more
information, contact your wireless NIC manufacturer.
• To use a Windows
®
7 or Windows
®
8 computer as a Registrar, you need to register it to your network in
advance. See the instructions supplied with your WLAN access point/router.
a
Turn on your machine.
b Set your machine in WPS mode (see Using the PIN Method of Wi-Fi Protected Setup (WPS)
on page 20).
c (Windows ® 7)
Click (Start) > Devices and Printers > Add a device.
(Windows
®
8)
Move your mouse to the lower right corner of your desktop. When the menu bar appears,
click Settings > Control Panel > Hardware and Sound > Devices and Printers > Add a device.
d Choose your machine and type the PIN that your machine displayed.
e Choose the Infrastructure network that you want to connect to, and then click Next.
f When your machine appears in the Devices and Printers dialog box, the wireless configuration and the
scanner driver installation has successfully completed.