Brother ADS-1000W - Manual (Page 45)

Web Based Management
42
4
Synchronize with the SNTP Server
4
Simple Network Time Protocol (SNTP) is the protocol used to synchronize the time used by the machine for
authentication with the SNTP time server (this is not the time displayed on the machine's LCD). You can
regularly synchronize the machine's time with the Coordinated Universal Time (UTC) provided by the SNTP
time server.
NOTE
This function is not available in some countries.
a Follow step a, starting on page 38.
b When the Web Based Management screen appears, click Network, and then click Protocol.
c Select the SNTP check box to activate the setting.
d Click Advanced Setting.
 Status
Displays whether the SNTP server settings are enabled or disabled.
 SNTP Server Method
Choose AUTO or STATIC.
• AUTO
If you have a DHCP server in your network, the SNTP server will automatically obtain the address
from that server.
• STATIC
Type the address you want to use.
 Primary SNTP Server Address, Secondary SNTP Server Address
Type the server address (up to 64 characters).
The Secondary SNTP server address is used as a backup to the Primary SNTP server address. If the
Primary server is unavailable, the machine will contact the Secondary SNTP server.
 Primary SNTP Server Port, Secondary SNTP Server Port
Type the Port number (1 to 65535).
The Secondary SNTP server port is used as a backup to the Primary SNTP server port. If the Primary
port is unavailable, the machine will contact the Secondary SNTP port.
 Synchronization Interval
Type the number of hours between server synchronization attempts (1 to 168 hours).
NOTE
• You must configure Date&Time to synchronize the time used by the machine with the SNTP time server.
Click Date&Time and then configure Date&Time on the General screen.
(ADS-1500W/ADS-1600W only)
You can also configure the date and time from the machine’s control panel.